Copyright © 2023 Guangdong Tongwei Machinery Co., Ltd. All Rights Reserved.
Links | Sitemap | RSS | XML | Privacy Policy
5 Ton 5HP Air Cooled Industrial Chiller For Plastic Processing Cooling
2024-08-20
5 Ton 5HP Air Cooled Industrial Chiller, also called air cooled water chiller,usually with one 5HP scroll Panasonic compressor, is widely used in plastic processing cooling systems such as for cooling injection molding machine,extruder machine,cooling plastic mould and so on. These chillers, we called injection molding chiller and extrusion chillers, are perfect for cooling plastic extrusion molding lines.
Air cooled industrial chillers are highly chosen by users because they don't need a separate water source or water cooling tower, making them easy to install in various locations. They are ideal for situations where water is scarce or water cooling infrastructure is impractical.
Although air cooled industrial chillers may have slightly lower efficiency compared to water cooled industrial chiller units due to ambient air temperature, they offer significant cost savings and environmental benefits by reducing water consumption and eliminating the need for water treatment.
5 Ton 5HP Air Cooled Industrial Chiller Products Information
●：5 Ton 5HP Air Cooled Industrial Chiller cooling capacity 14KW=12000Kcal/h=47000 Btu/h
●：Panasonic scroll compressor with environmental friendly R407c/R410a/R134a refrigeration
●：Temperature control 5℃ to 35℃
●：Temperature stability ±0.5℃ to ±2℃
●：Large Copper Condensing Coil with Aluminum Fins
●：Built-in stainless steel water tank and water pump
●：Shell & tube or SS Plate Heat Exchanger for optional
●：Schneider Electrical components & Mic-computer control panel
●：Air cooled industrial chiller is Easy installation and energy saving
5 Ton 5HP Air Cooled Industrial Chiller Products Specification
|
Model |
TW-5A |
|||
|
nominal cooling capacity |
Kcal/h |
11988 |
||
|
Kw |
13.94 |
|||
|
TON |
3.96 |
|||
|
Btu/h |
47563 |
|||
|
Max power consumption |
kw |
5.4 |
||
|
Full load |
Amp |
10.3 |
||
|
power source |
3PH - 220-480V - 50/60HZ |
|||
|
refrigerant |
type |
Environmental friendly R407c/R410a/R134a |
||
|
control |
external balance of thermal expansion valve |
|||
|
compressor |
type |
hermetic scroll type |
||
|
power |
kw |
4.28 |
||
|
condenser |
type |
Efficient aluminum finned copper sleeve+low noise external rotor fan |
||
|
air volume |
m3/h |
5000 |
||
|
fan motor |
kw |
0.19*2 |
||
|
evaporator |
type |
SUS water tank type evaporator |
||
|
cooling water flow rate |
m3/h |
2.4 |
||
|
Water tank volume |
Liter |
60 |
||
|
Water tank material |
SUS304 Stainless Steel |
|||
|
inlet and outlet connection |
1’’ |
|||
|
Water pump |
power |
KW |
0.75 |
|
|
Max Flow |
M3/h |
10.8 |
||
|
Pressure |
Bar |
2.5 |
||
|
safety devices |
Compressor overheating protection,over-current protection,high and low pressure protection,over-temperature protection,traffic protection,phase sequence/phase loss protection,low level protection,frost protection |
|||
|
dimension |
mm |
1150*620*1355 |
||
|
weight |
kg |
185 |
||
Q1:Could you quote us 5 Ton air cooled industrial chiller for our project?
A1: Yes, we can quote you 5 Ton air cooled industrial chiller with best price. But please provide below information as following:
1)chilled water inlet and outlet temperature
2)chilled water flow
3) Refrigerant:R22,R407c,R410a or others ?
4) Ambient temperature;
5)Voltage:-V-Hz-Phase?
6) Be used for what industry?
7)The Chiller whether need built with water tank ?
8)Quote you EXW price or CIF ?
Q2:How to ensure your product with good quality?
A2: All our products with CE certificate. And use the well-know brand accessories, such as Panasonic compressor ,Schneider,Dunli air blower.
All our chillers are factory tested under load conditions to ensure good quality and easy installation for users
Q3:What's the warranty?
A3: 12 months warranty for free if confirmed by both side damage in the quality reason.
Q4:How can I Place an order ?
A4: Click Below to fill the table or directly Email:[email protected]
